The device is manufactured from AISI 304 material for its construction and sheet metal parts.

It features an ergonomic design that provides convenience to the user in every aspect.

The device is equipped with height-adjustable feet.

The device is designed for countertop use.

The lower cooking area of the device is 440 mm x 400 mm, and the upper cooking area is 400 mm x 360 mm.

When the oil in the oil tank is filled and not emptied, it overflows through overflow holes located in front of it, preventing oil from accumulating inside the device.

It is designed for easy removal and cleaning of the drawer.

The lower and upper heaters in the device are individually controlled. The lower heaters are controlled by a thermostat in the range of 50°C to 300°C. The upper heaters are controlled by a thermostat in the range of 50°C to 250°C.

The device includes 2 pieces of 1500 W heaters in the lower cooker and 2 pieces of 1500 W heaters in the upper cooker. The use of resistors and thermostat control inside the device ensures homogeneous temperature distribution on the cooking plate.

Next to the temperature control knob on the device, there are two signal lamps of different colors. The green signal lamp indicates that the device is receiving electricity. The yellow signal lamp indicates that the heater is operational. It remains lit until the desired temperature is reached and goes out when it is reached.

The device can store and quickly switch between 6 different time settings using its electronic card.

When the upper heater of the device is set to the closed position, the selected program enters patrol mode, and the previously set time counts down. When the time ends, the upper heater automatically turns on and emits a warning sound.

The distance between the upper heater and the lower heater can be adjusted with a handle located on the device while the position between them is closed. Adjustment can be made by turning clockwise or counterclockwise, and a distance adjustment of 0-25 mm can be made.

Heat-resistant Teflon material, which prevents sticking and is easy to clean and remove, is used for the upper heater of the device. It is recommended to remove and clean it at the end of the day.

Important Note: The current value given for the device is the current drawn by the device. The fuse ampere value to be used according to the length of the cable connecting to the device must be determined by a competent electrician.